Dents on any surfaces in your home can be annoying and frustrating to look at, especially if you see them on your garage door.
The good news is, there are ways you can do a dented garage door repair if the damage is minimal.
But if the dents are enormous, then you might need a garage door replacement.
Read more if you want to know how to do a dented garage door repair.
However, if the damages are severe, call Smooth Garage Doors for a panel replacement.
The Importance of a Dented Garage Door Repair
Leaving a dent or two might lead you to think that it could not harm the garage door’s overall system.
However, you might want to fix it quickly to prevent more damage to the panels and other garage door parts.
Panel dents can lower the curb appeal and value of your home.
Most buyers look for homes with a sophisticated and updated look.
If you leave the dents unrepaired, you could have a hard time selling your house if you ever plan to do it in the future.
It’s essential to consider different ways to fix them depending on the material when it comes to dents.
If you want the dents to be gone for good, you can ask help from a garage door repair company to achieve it for you.
Dented Garage Door Repair Procedure
But if you want to fix the dent for yourself, make sure you can manage the job.
Also, it should not be too big enough.
You may want to avoid the bigger ones since they are beyond repair.
First Step: Clean the Dented Area
The first step is to clean the problematic area using warm water with a mild detergent or dish soap.
Fill the bucket with a solution of water and one teaspoon of dish soap.
Then soak your preferred medium for cleaning the material: sponge or microfiber cloth to remove the dirt on the dent.
Apply the sponge or cloth with the solution and clean the area thoroughly.
Then, remove everything with water and dry the area thoroughly.
The drying process usually takes an hour before the area gets dried.
The next thing to do is to prepare the rubber mallet and block of wood.
Place the wood over the dent and use the rubber mallet to tap the wood.
Tap it until you even out the surface.
Second Step: Smoothen Out the Surface
For this step, prepare fine-grit sandpaper.
Sand the partially-even surface to smoothen it out to ensure it matches the rest of the door.
The only difference is the dented area needs sanding down as opposed to the rest of the door.
Don’t sand the area with no dents so you can identify the sanded area that should look concaved compared to the smooth area.
In this way, it will be easy to fill the concave spot to later prime and paint it to blend with the smooth area seamlessly.
Third Step: Fill and Paint the Dent
This is the step where you need to work with the putty material.
If your door is made of wood, simply fill the dent with epoxy wood putty.
However, if your door is made from steel, you can use an all-purpose putty.
Apply the putty into the putty knife and smooth it out as best as you can.
Make sure to read the instruction attached with the putty material to determine how long it takes to dry completely.
Once the putty hardens, use sandpaper to smooth out the area.
This ensures that the patched area is precisely leveled with the rest of the garage door’s surface.
Follow up the procedure by cleaning the area by removing any dirt you see with a wet towel.
Then dry the area again.
Afterward, you can apply a primer and paint to ensure the dented area is no longer apparent.
Make sure to use paint that matches the rest of the door’s surface.
In this way, no one can notice that there has been a dent on the door panel.
Take Care of Your Garage Door
It doesn’t hurt to perform maintenance by cleaning and inspecting the door after fixing the small dents.
In this way, you’ll be able to spot problems ahead of time to prevent expensive repairs soon.
However, if your garage door has multiple and severe dents, call a professional garage door repair in Vaughan and Richmond Hill.
We provide high-quality services to both residential and commercial garage doors.
Get rid of the dents, and let us do the dented garage door repair for you!
